weld joint
英 [weld dʒɔɪnt]
美 [weld dʒɔɪnt]
网络 焊接关节; 焊接接头; 焊缝
双语例句
- Numerical Simulation on Residual Stress Fields and Temperature Fields of Weld Joint in the Process of Fusion Welding
熔化焊焊接接头的温度场和应力数值模拟剂油短时接触催化裂化工艺及催化剂 - Experiment study on closured weld joint type of pressure pipes
压力钢管合拢焊缝接头形式试验研究 - Failure Analysis on the Cracked Weld Joint of Stainless Steel Used in Hydrocracker
加氢裂化装置不锈钢管线焊缝开裂失效分析 - And by communicating between the PC and microchip controller, it can realize to real-time monitor microchip controller, so that the system can forecast and control the weld joint properties.
并通过上下位机之间的数据通信，对下位机进行实时监控，实现接头质量的预测与控制。 - The corrosion behavior of austenite stainless steel weld joint in the different acidic medium was studied.
研究了奥氏体不锈钢焊接接头在不同酸性介质中的腐蚀行为。 - Due the fact that the acetylene is not used, the gas welding device can be optionally loaded and conveyed to carry out the weld joint in the maintenance work.
因为不用乙炔所以该气焊设备可以任意装车搬运，进行维修工作中的焊接。 - Rapid solidification and phase separation of micro spot weld joint of rapidly solidified Fe-Cu peritectic alloy foils
Fe-Cu包晶合金急冷箔点焊接头的快速凝固与相分离 - Numerical simulation of residual stress relaxation in typical weld joint of FPSO under fatigue loading
FPSO典型焊接接头在疲劳载荷下的残余应力释放数值模拟 - Electrochemical Corrosion Behavior of Weld Joint of Hot Rolled Austenite Stainless Steel Plates
奥氏体不锈钢热轧板焊接接头的腐蚀行为 - The pulse duration can decide the pool liquid flow, and further significantly impact the forming of weld joint.
而脉冲宽度直接决定了对流机制的形成条件，对焊缝的形成影响显著； - The reason of the Weld Joint Cracking on high frequency welding pipe was investigated by using macroscopic observation, metallographic technology, fracture analysis and EBSD technology.
本文通过使用宏观观察、金相分析、断口分析和电子背散射衍射（EBSD）等分析手段对高频焊管焊后弯管开裂的原因进行了分析。 - Influence about Weld Joint Property and Destruction of Aluminium Lithium Alloy by Argon Arc Welding Method
氩弧焊接方法对铝锂合金焊接接头性能和破坏的影响 - The investigation provided the theoretic evidence and the new test method for the measurement of the local constitutive properties of the weld joint.
该研究为焊接接头局部本构关系的表征提供了理论依据和新的试验方法。 - This paper which is about the welding procedure qualification test of the SA213-T23 steel pipe, analysis the influence of post heat-treatment on the weld joint, and got the right welding process.
本文主要通过对SA213-T23钢小径管的焊接工艺评定试验，分析焊后热处理对T23钢焊接接头性能的影响，从而确定正确的焊接工艺。 - Comparison Analysis of Different Nondestructive Testing Methods on Butt Weld Joint
不同检测方法在对接焊接接头检测中的对比 - An approach to magnetic particle detection technology used for angle weld joint on small size tube socket based on yoke magnetization method
小尺寸管座角焊缝磁轭法磁粉检测工艺探讨 - Arc strike marks on base metal outside the weld joint should be avoided but if present should be treated as defects requiring removal or repair.
应防止在焊接接头之外的母材上产生弧击痕迹，但是如果出现了，就应按照焊接缺陷来进行处理，需要清除或补焊。（请指正） - The tensile properties and microstructure of LF6 aluminum alloy weld joint under simulating near earth space environment are studied by means of vacuum thermal cycling system.
采用真空热循环试验装置，模拟近地轨道空间环境，研究了LF6铝合金焊接接头拉伸性能和微观组织，分析讨论了真空热循环对焊接接头的影响规律。 - Fatigue performance of weld joint for high strength bridge steel
高强度桥梁钢焊接接头疲劳性能的研究 - Initiation Mechanics of Fatigue Crack at Weld Joint of High Strength Bridge Steel
高强度桥梁钢焊缝疲劳裂纹萌生机理的研究 - Widely used for butt weld joint between carbon steel, alloy steel, non-ferrous pipes, bars and profiled materials or butt weld between heterogenous metals.
广泛用于碳钢、合金钢、有色金属的管、棒、板、型材之间的对焊或异类金属之间的对焊。 - Microstructure and corrosion performance of weld joint of C4 alloy/ x60 steel filled with low alloy steel filler
低合金钢焊丝焊接C4镍基合金/X60钢熔合区组织与耐蚀性 - Application of a High Accuracy Detection System in Welding Deformation of Closured Weld Joint
高精度检测系统在合拢焊缝焊接变形中的应用 - In order to realize welding automation and improve welding quality, the weld joint tracking system is needed.
为了实现焊接自动化以及提高焊接质量，需要引入焊缝跟踪系统。 - The sensitivity to hydrogen embrittlement for a weld joint was evaluated according to its tensile property and fracture characteristic.
根据拉伸性能及断裂特性，评定焊接接头的氢脆敏感性。 - An automatic CO2 welding device for elbow pipe and flange fillet weld joint is introduced in the paper.
介绍一种弯管和法兰角接接头填角焊的自动焊接装置。 - Hardness and strength and ductility of weld joint had been increased.
增大焊接电流使焊缝区组织粗大，晶粒内部针状马氏体增多，接头硬度、强度和塑性都有所提高。